Hpbq138 Patched.zip
LINK ->>->>->> https://urluso.com/2tykvi
How to Download and Use Hpbq138 Patched.zip
Hpbq138 Patched.zip is a file that contains an old DMI tool which is used to 'tattoo' the BIOS with the model serial number and product number of HP laptops[^1^]. This can be useful if you need to restore or update your BIOS settings or if you want to change the information displayed on your laptop screen.
In this article, we will show you how to download and use Hpbq138 Patched.zip on your HP laptop. Please note that this is not an official HP tool and you should use it at your own risk. We are not responsible for any damage or loss that may occur as a result of using this tool.
Step 1: Download Hpbq138 Patched.zip
You can download Hpbq138 Patched.zip from one of the following sources:
The HP Support Community forum, where a user named Paul_Tikkanen has attached it as a reply to two posts asking for it[^1^] [^2^]. You can find the posts by searching for \"Hpbq138 Patched.zip\" on the forum.
The Vidyakansha website, where a user named Vidyakansha has posted a link to download it[^3^]. You can find the post by searching for \"Hpbq138 Patched.zip\" on the website.
Once you have downloaded Hpbq138 Patched.zip, you need to unzip it to extract the file Hpbq138.exe.
Step 2: Run Hpbq138.exe
Before you run Hpbq138.exe, you need to make sure that your laptop is plugged in and has enough battery power. You also need to close all other programs and save any important data. Running Hpbq138.exe may cause your laptop to restart or shut down unexpectedly.
To run Hpbq138.exe, you need to right-click on it and select \"Run as administrator\". You will see a command prompt window with some instructions. Follow the instructions carefully and enter the information that you want to tattoo on your BIOS. For example, you can enter your laptop model, serial number, product number, etc. You can also leave some fields blank if you don't want to change them.
After you have entered all the information, press any key to continue. The program will then write the information to your BIOS and show you a confirmation message. Press any key again to exit the program.
Step 3: Check the Results
To check if the program has successfully tattooed your BIOS, you can restart your laptop and enter the BIOS setup menu. You can do this by pressing a specific key during the startup process, such as F10, F12, Esc, or Del. The key may vary depending on your laptop model. You can also check the information displayed on your laptop screen when you turn it on.
If everything went well, you should see the information that you entered using Hpbq138.exe. If not, you may need to repeat the process or contact HP support for assistance.
Conclusion
In this article, we have shown you how to download and use Hpbq138 Patched.zip on your HP laptop. This is an old DMI tool that can help you tattoo your BIOS with the model serial number and product number of your laptop. However, this is not an official HP tool and you should use it at your own risk. We hope that this article was helpful and informative for you. 061ffe29dd